The new PE 7 / 11 woodpellet boiler from ETA Heiztechnik in Austria comes to the Irish market with many new innovative features that make this boiler stand head and shoulders above the rest.

Although the boiler may be small on size it is by no means small on features, in fact the boiler has so much packed into such little space it has been winning awards all over Europe with the most notable award being the “ENERGY GENIE” award at the international renewable energy exhibition in Wels during 2008.

DESIGN

A major problem with most biomass boilers is trying to find space for boiler, fuel store plus a range of manifolds and pumps. ETA have taken a concept that has been embraced by Natural Gas boiler manufacturers and used to make the PE 7 / 11 the first biomass central heating boiler to offer the following items;

• Separate flows for heating system and hot water cylinder with a single cold water return.

• Built in, low energy, circulation pump

• Built in expansion vessel

• Built in return water temperature riser that allows the boiler to operate with underfloor heating efficiently without having any of the associated problems some boilers have when handling low temperature return water.

The PelletsUnit has been designed with passive houses and modern conventional houses in mind. The 7kW boiler is ideal for use as a backup boiler in passive houses, whereas the 11kW version can heat a house up to 250m² in size that has been built to today’s building regulations.

Designers have specifically kept in mind the need to fit the PelletsUnit into today’s buildings and apartments, coming in with a footprint of 696mm x 1040mm the PE 7 / 11 is the smallest, fully automatic, biomass boiler on the market. The design is such that the boiler can be pushed right in against the wall on two sides to make sure that there is no dead space.

CONVENIENCE

The system is fully automatic and requires minimum maintenance by the customer and all of the following features are fitted as standard

• Automatic ignition means the boiler lights when heat is needed and switches off when it is not. There is no need for fire lighters or having a fire running in the heart of the boiler 24 hours a day in case the house needs heat.

• Cleaning is taken care of on a daily bases by the PelletsUnit when it goes through the procedure of cleaning the internal heat exchanger and burning grate before moving the ash into the ash bin that is mounted at the front of the boiler.

• The PelletsUnit is connected to the main pellet store by means of 2 x 50mm vacuum hoses. The boiler uses these hoses to fill its own 30kg hopper once a day. Due to the flexibility of this vacuum system the main hopper can be up to 20 meters away from the boiler, whether the main store is located in the garage, around the side of the house or even buried in the ground does not really matter. Vacuum hoses can be buried underground, put through walls, routed through the attic, brought around corners, etc.

EFFICIENCY

The new PE 7/11 boiler also weighs in as being one of the most efficient boilers on the market for converting combustible fuel energy into usable heat energy for the home. If the PelletsUnit is installed inside the house then the boiler is able to extract 97.5% of useable heat from burning wood pellets, losing just 2.5% of the heat up the chimney. Compare this to other house heating systems.

• 15 – 20% Open fire

• 35 – 45% Solid fuel cooker with back boiler

• 55 – 60% Solid fuel stove

• 60 – 75% Standard oil fired boiler

The PelletsUnit is able to achieve such high levels of efficiency as a result of a highly efficient burning grate that is able to remove ash from the burning are almost as soon as it is formed. This gives rise to longer and better burning of the wood fuel in the grate and as a result leaves very little ash residue – the customer will have to empty the ash bin on average 2 times per year.

WEATHER INFLUENCED HEATING

If the customer utilizes the boiler controls to their full potential then they can live in a house with weather influenced heating. What’s that you may ask? To put it simply it is a system that allows the boiler to automatically increase/decrease the water flow temperature depending on the outdoor temperature.

How does this work? There are two parts to this equation that the PelletsUnit uses when deciding what temperature to send water to the radiators at – 1.) Outdoor temperature, and 2.) Indoor temperature.

Outdoor Heating Curve

The boiler uses a sliding scale for setting a base temperature for heating the water to, for example if the outdoor temperature at -10°C means 60°C water and outdoor temperature at +10° means 35° water. Using an outdoor temperature probe the boiler will automatically choose the base temperature for the water flow temperature, so at 0°C outdoor temperature the boiler would send water at 47°C to the radiators.

Indoor Heating Boost

Using its own room thermostat the boiler constantly monitors the indoor temperature of the house and adds a boost to the water flow temperature for every degree the room is below the desired room temperature. If we continue on from the above paragraph we can calculate the water flow temperature that the boiler will send to the radiators.

USER INTERFACE

The user interface on the PE 7/11 boiler is also a first in class with a built in touch screen LCD panel.

The panel offers clear andconcise data for the customer to view when required and changing values is as easy as tapping a few areas on the screen. The built in memory of the UI means there is no longer a need for a paper operating manual because the user manual is built into the unit and can be accessed by pressing the info button.

CONTROL

The boiler has quite a number of other features built into the control panel including controls for both buffer tank management and solar panel management. If the boiler is installed without a buffer tank then solar panels can be managed by the PelletsUnit to heat a twin coil solar tank. The boiler will give priority to the solar panels based on the time of day, temperature of solar panels and temperature of solar tank. The boiler will only heat up the solar tank when it is happy that there is not enough solar energy available to do so.

Likewise, if the customer installs a buffer tank with a solar coil the PelletsUnit will give the same priority to solar heating before it kicks in to heat the buffer tank. This type of setup gives the customer the option of using solar heat in the heating system as well as the hot water cylinder.